• Open mesh polyester braiding incorporated within the wall of silicone tubing
• Silicone elastomer meets USP Class VI and NSF-51 requirements
• Translucent natural color for visual contact with the flow
• Able to resist extreme temperature variation: -80°F to 350°F
• Odorless, tasteless, and inert
• All ingredients are non-toxic and FDA-sanctioned for use with food contact surfaces
• Manufactured under strict Good Manufacturing Procedures in a controlled environment

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

• Thermobarb® - Plastic Multi-Barbed Fittings
• Thermobarb® - FDA PP Barbed Fittings
• Thermobarb® - Brass Barbed Fittings
• Oetiker® ear type clamps
• Kwik Clamp(TM) nylon double bond hose clamps
• Stainless steel worm gear clamps (lined only)

SILBRADE MEDICAL's construction consists of a core of silicone elastomer, an open polyester braid reinforcing layer, and a cover layer of silicone elastomer. Good Manufacturing Procedures, including lot traceability, are applicable to all Class VI ingredients. It is a peroxide-cured product.

The hose's smooth bore, coupled with its resistance to allow material to adhere to the tube wall, facilitates easy cleaning and system purging.

SILBRADE MEDICAL may be low pressure sterilized in-line or autoclaved up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, will eventually relax and become gummy. It should then be replaced.

Care is recommended in the selection and application of fittings and clamps for SILBRADE MEDICAL, as extremely sharp barbs or unlined clamps could tear into the wall and possibly cause a failure, especially at elevated pressures.

Peroxide cured SILBRADE MEDICAL hose is supplied in individual, non-sterile, heat sealed polybags and should be sterilized prior to use.

Custom sizes, colors, and platinum curing (for reduced extractables) are available through minimum order.

Note: SILBRADE MEDICAL is not recommended for implantable or in-body uses or for continuous steam applications.

Sold by standard coil length only (25 ft.). Add length suffix to part number when ordering.
Example: 25 ft. of 1/8" tubing is part number 291 0180-25.
[D] Burst pressures can be expected to decrease by at least 20% for each 200°F increase up to 350°F.
ID is the critical dimension for fittings application.