NewAge Industries Plastic Tubing and Hose Fluid Transfer Specialists


FLUOROPOLYMER TUBING   Back to Tubing & Hose Page
PFA, FEP, PTFE tubing

Made in USA

   PTFE, FEP & PFA Fluoropolymer Tubing
 
  • Chemically inert; low permeability
  • Lowest coefficient of friction of any solid material
  • Excellent electrical and weathering properties; non-flammable
  • Made without plasticizer which can leach into critical streams
  • Free of animal derived components
  • Raw materials are FDA and USP Class VI compliant
  • REACH and RoHS compliant
  • PTFE is free of BPA, phthalates and latex
  • FEP and PFA are free of conflict minerals
  • Ultra-high-purity grades available for the semiconductor industry (FEP and PFA only)
APPLICATIONS

Adhesives • Beverage • Chemical Plants • Corrosives • Cryogenics • Deionized Water Transfer • Food Transfer • Lighting Covers • Laboratory • Medical • Paint Spray • Pure Water Systems • Sight Glass • Solvents • Water Sampling • Wire Insulation

Physical Properties**
  PTFE FEP PFA
Hardness, Shore D 50-65 57-60 60
Tensile Strength, psi 2000-3000 4000 4200
Elongation at Break, % 200-450 400 400
Brittle Temperature <-450F <-450F <-450F
Max. Continuous Op. Temp. 500F 400F 500F

**Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

 

Notes

Almost totally inert, Fluoropolymer can be used with virtually all industrial solvents, chemicals, and corrosive materials, even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals.

Fluoropolymer Tubing can be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method.

Fluoropolymer's non-stick property allows transport of viscous, sticky materials without line clogging. It also offers outstanding aging resistance.

PTFE's translucent white color will vary naturally from lot to lot, however, the quality and physical properties do not change. FEP & PFA are clearer and can be heat sealed and heat bonded.

Permanent color striping, etching, and longer-than-listed lengths are available through minimum order. Polyethylene- jacketed, thin-wall fluoropolymer tubing, for low-cost purity, is also available through minimum order — call for details.

back to top TOP OF PAGE


Request for QuotePTFE TUBING

Product Number Note  ID  OD  Wall  Material  Available Lengths  Working PSI (at 73F)  Bend Radius (in.)  Bend Radius (mm) 
  3000074   .031 (1/32)  .063 (1/16)  .016  Fluoropolymer PTFE  100  412  1/2   
  3000151   .031 (1/32)  .094 (3/32)  .030  Fluoropolymer PTFE  100  390  1/2   
  3000228   .063 (1/16)  .125 (1/8)  .030  Fluoropolymer PTFE  50, 100  290  1/2   
  3000382   .094 (3/32)  .156 (5/32)  .030  Fluoropolymer PTFE  50, 100  220  5/8   
  3000459   .125 (1/8)  .188 (3/16)  .030  Fluoropolymer PTFE  50, 100  180  3/4   
  3000536   .125 (1/8)  .250 (1/4)  .063 (1/16)  Fluoropolymer PTFE  50, 100  290  1/2   
  3000690   .188 (3/16)  .250 (1/4)  .030  Fluoropolymer PTFE  50, 100  130   
  3000767   .188 (3/16)  .313 (5/16)  .063 (1/16)  Fluoropolymer PTFE  50, 100  222  7/8   
  3000844   .250 (1/4)  .313 (5/16)  .030  Fluoropolymer PTFE  50, 100  100  2-1/4   
  3000921   .250 (1/4)  .375 (3/8)  .063 (1/16)  Fluoropolymer PTFE  25, 50, 100  180   
  3000998   .313 (5/16)  .375 (3/8)  .030  Fluoropolymer PTFE  25, 50, 100  80  2-3/4   
  3001152   .375 (3/8)  .438 (7/16)  .030  Fluoropolymer PTFE  25, 50, 100  70   
  3001229   .375 (3/8)  .500 (1/2)  .063 (1/16)  Fluoropolymer PTFE  25, 50, 100  130  2-1/4   
  3001306   .438 (7/16)  .500 (1/2)  .030  Fluoropolymer PTFE  25, 50, 100  60   
  3001460   .500 (1/2)  .563 (9/16)  .030  Fluoropolymer PTFE  25, 50, 100  55   
  3001537   .500 (1/2)  .625 (5/8)  .063 (1/16)  Fluoropolymer PTFE  25, 50, 100  100   
  3001614   .563 (9/16)  .625 (5/8)  .030  Fluoropolymer PTFE  25, 50, 100  50  5-1/2   
  3001845   .625 (5/8)  .750 (3/4)  .063 (1/16)  Fluoropolymer PTFE  25, 50, 100  80   
  3010175   2mm  4mm  1mm  Fluoropolymer PTFE  50, 100  290    13 
  3010350   4mm  6mm  1mm  Fluoropolymer PTFE  50, 100  180    25 
  3010525   6mm  8mm  1mm  Fluoropolymer PTFE  50, 100  130    51 
  3010700   8mm  10mm  1mm  Fluoropolymer PTFE  25, 50, 100  100    64 
  3010875   10mm  12mm  1mm  Fluoropolymer PTFE  50, 100  80    76 
  3011050 [B]  12mm  14mm  1mm  Fluoropolymer PTFE  50, 100  60    89 

[B] Limited stock item; lead times and minimums may apply --call for details.
I.D. and O.D. dimensions are NOMINAL. Wall dimension is REFERENCE.
Sold by standard coil length only.
Working pressures are calculated from burst testing using a 4:1 safety factor. Application testing is recommended.
Add length suffix to part number when ordering. Example: 100 ft. of 1/32" I.D. x 1/16" O.D. tubing is part number 300 0074-100.
NOTE: Orders for 50 ft. lengths of PTFE tubing may be filled with a maximum of two lengths of product totaling 50 ft. Orders for 100 ft. lengths of PTFE tubing may be filled with a maximum of three lengths of product totaling 100 ft.

OD is the critical dimension for fittings application.
Dowload a printable PDF version of our Fluoropolymer Tubing, Hose & Fitting Catalog.

Fluoropolymer_Catalog.pdf (1.4MB)

Requires Adobe® Reader® to view.

back to top TOP OF PAGE


Request for QuoteFEP TUBING

Product Number Note  ID  OD  Wall  Material  Available Lengths  Working PSI (at 73F)  Bend Radius (in.)  Bend Radius (mm) 
  3100090   .063 (1/16)  .125 (1/8)  .030  Fluoropolymer FEP  50, 100  445  1/2   
  3100167   .063 (1/16)  .188 (3/16)  .063 (1/16)  Fluoropolymer FEP  50, 100  612  1/2   
  3100244   .094 (3/32)  .156 (5/32)  .030  Fluoropolymer FEP  50, 100  357  1/2   
  3100321   .125 (1/8)  .188 (3/16)  .030  Fluoropolymer FEP  50, 100  296  3/4   
  3100398   .125 (1/8)  .250 (1/4)  .063 (1/16)  Fluoropolymer FEP  50, 100  460   
  3100552   .188 (3/16)  .250 (1/4)  .030  Fluoropolymer FEP  50, 100  223  1-1/2   
  3100629   .188 (3/16)  .313 (5/16)  .063 (1/16)  Fluoropolymer FEP  50, 100  368  1-1/2   
  3100706   .250 (1/4)  .313 (5/16)  .030  Fluoropolymer FEP  50, 100  178  1-3/4   
  3100783   .250 (1/4)  .375 (3/8)  .063 (1/16)  Fluoropolymer FEP  25, 50, 100  307   
  3100860   .313 (5/16)  .375 (3/8)  .030  Fluoropolymer FEP  25, 50, 100  148  2-1/2   
  3101014   .375 (3/8)  .438 (7/16)  .030  Fluoropolymer FEP  50, 100  127  3-1/2   
  3101091   .375 (3/8)  .500 (1/2)  .063 (1/16)  Fluoropolymer FEP  25, 50, 100  230   
  3101168   .438 (7/16)  .500 (1/2)  .030  Fluoropolymer FEP  25, 50, 100  111   
  3101322   .500 (1/2)  .563 (9/16)  .030  Fluoropolymer FEP  25, 50, 100  89  12   
  3101399   .500 (1/2)  .625 (5/8)  .063 (1/16)  Fluoropolymer FEP  25, 50, 100  184   
  3101707   .625 (5/8)  .750 (3/4)  .063 (1/16)  Fluoropolymer FEP  25, 50, 100  153   
  3101784 [B]  .688 (11/16)  .750 (3/4)  .032  Fluoropolymer FEP  25  74   
  3101938 [B]  .750 (3/4)  .830  .040  Fluoropolymer FEP  10 Straight  74   
  3102015   .750 (3/4)  .875 (7/8)  .063 (1/16)  Fluoropolymer FEP  5, 10 Straight  132  12   
  3102169   .875 (7/8)  1.000  .063 (1/16)  Fluoropolymer FEP  5, 10 Straight  115  22   
  3102246 [B]  1.000  1.100  .050  Fluoropolymer FEP  5, 10 Straight  75  26   
  3102323   1.000  1.125 (1 1/8)  .063 (1/16)  Fluoropolymer FEP  5, 10 Straight  75  24   
  3102477 [B]  1.250 (1-1/4)  1.375 (1-3/8)  .063 (1/16)  Fluoropolymer FEP  5, 10 Straight  70  30   
  3102631 [B]  1.500 (1-1/2)  1.625 (1-5/8)  .063 (1/16)  Fluoropolymer FEP  64  36   
  3110177   2mm  4mm  1mm  Fluoropolymer FEP  50, 100  464    38 
  3110352   4mm  6mm  1mm  Fluoropolymer FEP  50, 100  309    44 
  3110527   6mm  8mm  1mm  Fluoropolymer FEP  50, 100  232    64 
  3110702   8mm  10mm  1mm  Fluoropolymer FEP  25, 50, 100  186    70 
  3110877   10mm  12mm  1mm  Fluoropolymer FEP  50, 100  155    102 
  3111052   12mm  14mm  1mm  Fluoropolymer FEP  50, 100  119    305 

[B] Limited stock item; lead times and minimums may apply --call for details.
Sold by standard coil length only.
I.D. dimension is REFERENCE.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
Add length suffix to part number when ordering. Example: 50 ft. of 1/16" I.D. x 1/8" O.D. tubing is part number 310 0090-50.
All FEP lengths are supplied in single-section packages.

OD is the critical dimension for fittings application.
fluoropolymer catalog
Dowload a printable PDF version of our Fluoropolymer Tubing, Hose & Fitting Catalog.

Fluoropolymer_Catalog.pdf (1.4MB)

Requires Adobe® Reader® to view.
Get Adobe Reader

back to top TOP OF PAGE


Request for QuotePFA TUBING

Product Number Note  ID  OD  Wall  Material  Available Lengths  Working PSI (at 73F)  Bend Radius (in.)  Bend Radius (mm) 
  3200176   .063 (1/16)  .125 (1/8)  .030  Fluoropolymer PFA  50, 100  449  1/2   
  3200330   .094 (3/32)  .156 (5/32)  .030  Fluoropolymer PFA  50, 100  360  1/2   
  3200407   .125 (1/8)  .188 (3/16)  .030  Fluoropolymer PFA  50, 100  299  3/4   
  3200484   .125 (1/8)  .250 (1/4)  .063 (1/16)  Fluoropolymer PFA  50, 100  464  1/2   
  3200561   .188 (3/16)  .250 (1/4)  .030  Fluoropolymer PFA  50, 100  225   
  3200715   .250 (1/4)  .313 (5/16)  .030  Fluoropolymer PFA  50, 100  179  1-3/4   
  3200792   .250 (1/4)  .375 (3/8)  .063 (1/16)  Fluoropolymer PFA  25, 50, 100  310   
  3200869   .313 (5/16)  .375 (3/8)  .030  Fluoropolymer PFA  50, 100  150  2-1/2   
  3201100   .375 (3/8)  .500 (1/2)  .063 (1/16)  Fluoropolymer PFA  25, 50, 100  310   
  3201331   .500 (1/2)  .563 (9/16)  .030  Fluoropolymer PFA  25, 100  75  12   
  3201408   .500 (1/2)  .625 (5/8)  .063 (1/16)  Fluoropolymer PFA  25, 50, 100  186   
  3201716   .625 (5/8)  .750 (3/4)  .063 (1/16)  Fluoropolymer PFA  25, 50, 100  155   
  3210354   4mm  6mm  1mm  Fluoropolymer PFA  50, 100  312    44 
  3210529   6mm  8mm  1mm  Fluoropolymer PFA  50, 100  234    64 
  3210704   8mm  10mm  1mm  Fluoropolymer PFA  25, 50, 100  187    70 
  3210879   10mm  12mm  1mm  Fluoropolymer PFA  50, 100  156    102 

[B] Limited stock item; lead times and minimums may apply --call for details.
Sold by standard coil length only.
I.D. dimension is REFERENCE.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
Add length suffix to part number when ordering. Example: 25 ft. of 5/8" I.D. x 3/4" O.D. tubing is part number 320 1716-25.
All PFA lengths are supplied in single-section packages..

OD is the critical dimension for fittings application.
fluoropolymer catalog
Dowload a printable PDF version of our Fluoropolymer Tubing, Hose & Fitting Catalog.

Fluoropolymer_Catalog.pdf (1.4MB)

Requires Adobe® Reader® to view.
Get Adobe Reader

back to top TOP OF PAGE

 

BACK TO TUBING & HOSE PAGE

| Home | Products | About Us | Reference Tools | Contact Us | Request for Quote |
| News | Tradeshow Schedule | Employment Opportunities | Community Service | Why NewAge? |


Legal Notices & Trademarks | Privacy Policy | Terms & Conditions of Sale 2000 - 2017 NewAge Industries, Inc.

   facebook   linkedin   twitter   google plus

We are your "Fluid Transfer Specialists®"
Contact Us For Experienced Technical Support:
Phone: 800-506-3924 or 215-526-2300
Fax: 800-837-1856 or 215-526-2190
E-mail:
esales@newageindustries.com

NewAge® Industries, Inc., 145 James Way, Southampton, PA 18966-3817