At this time raw materials for fluoropolymer tubing are experiencing price and supply volatility. Certain sizes may also experience shortages. Call for current status.
Vacuum Service at 72°F: 29.9 in./Hg.
Bend Diameter at 72°F: 1/2 of tubing I.D.
Optimal flow is achieved and turbulence
minimized by passing fluids through CORRTEF in the
direction of the corrugation angles (as noted).
CORRTEF is heat sealable, and the cuffs
(straight ends) are made to accept standard barbed
fittings. The end may be flared or expanded to permit
CORRTEF is manufactured in an industrial atmosphere and should be properly sterilized for clean-flow applications. For optimal cleaning of CORRTEF the tube should be stretched to its maximum length and held vertically (direction of flow: down). NOTE: Due to the annular corrugations, it may not be possible to remove all traces of particulate from CORRTEF, even under optimal cleaning conditions.
^Overbraiding with Kevlar® will permit a minimum increase of 6X the listed pressures. Kevlar overbraiding is available for sizes up to 7/8" I.D. call for details.